English - International

SONNET
CI and EAS Audio Processor

These support guides will help you handle and care for the SONNET & SONNET EAS Audio Processor.

Changing the Microphone Cover

With Groove

SONNET Remove Cover
1

Insert the screwdriver into the groove at the bottom of the microphone cover.

2

Gently lever the cover away from the control unit.

SONNET Attach Cover
3

Place the new cover over the control unit.

4

Starting at the earhook end, press down until the cover snaps into place.

!

The cover should be changed every three months to maintain best possible hearing with SONNET.

Without Groove

Sonnet-Cover-Remove
1

Remove the earhook.

2

Gently pull the microphone cover off the control unit from the front using your fingernail.

Sonnet-Cover-Attach
3

Insert the microphone cover pins into the recesses in the control unit.

4

Carefully snap the microphone cover onto the control unit.

!

Make sure that the microphone cover pins have been inserted before you proceed to step 4.

Book-Icon

Refer to your user manual for more information.