Select your Language

Please, select a language for this page

AudioLink

These support guides will help you handle and care for your AudioLink.

Pairing with your Bluetooth® Device

 
1

Switch on AudioLink and make sure it is in standby mode. Only the status light should be active.

AudioLink Pairing with Bluetooth Device
2

To switch on Bluetooth® pairing mode, press the mix button and the mic button together for 2 seconds.

AudioLink Bluetooth
3

The Bluetooth® symbol will blink to show that AudioLink is ready to be paired.

AudioLink Pair with Phone
4

Make sure Bluetooth® is activated on your device, and search for available Bluetooth devices.

5

Select “MED-EL AudioLink” and start pairing.

6

If you are asked for a security key, enter “0000”.

!

If no device is paired within 60 seconds, AudioLink will no longer be in Bluetooth® pairing mode.

AudioLink Bluetooth
7

When AudioLink and your Bluetooth® device are successfully paired, the Bluetooth® symbol will stop blinking and pulse slowly.

AudioLink Streaming
8

Once AudioLink starts streaming to your audio processor, the left and/or right connection symbols on the main button will pulse slowly, to show that sound is being streamed to your left processor, right processor, or both processors.


The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by MED-EL is under license.

Book-Icon

Refer to your user manual for more information.