OPUS 2
Audio Processor

These support guides will help you handle and care for your OPUS 2 Audio Processor. 

Changing the Cable

OPUS2_batteryPackOpen
1

Remove the battery pack cover from the battery pack frame.

OPUS2_removeConnectingPiece
2

Remove the connecting piece.

OPUS2_batteryPack
3

Remove the battery pack frame from the control unit.

OPUS2_removeCoilCable
4

Remove the coil cable from the control unit by grasping the plug and gently pulling it out of the socket.

OPUS2_coilCable
5

Remove the coil cable from the D Coil.

OPUS2_coilCable
6

Connect the new coil cable to the D Coil.

OPUS2_insertCoilCable
7

Plug the coil cable into the control unit by inserting it into the control unit socket with the arrow facing upwards.

OPUS2_attachBatteryPack
8

Attach the battery pack frame to the control unit.

OPUS2_connectingPiece
9

Secure the battery pack frame by inserting the pins of the connecting piece into the two holes at the base of the control unit.

OPUS2_batteryPackCoverOn
10

Switch on OPUS 2 by sliding the battery pack cover onto the battery pack frame and closing the battery pack lock.

Book-Icon

Refer to your user manual for more information.