SAMBA
Audio Processor

These support guides will help you handle and care for the SAMBA Processor.

Changing the Battery

The battery lasts up to one week, depending on the selected program, environment, and duration of use. The battery should be replaced regularly or when the sound level drops off dramatically. If the battery is low, it must be replaced when you hear a series of beeps.

1

Hold the SAMBA between two fingers. First open one side of the battery compartment, then open the other side.

SAMBA Changing the Battery (1)
2

Open the battery compartment until the battery is completely visible. Carefully turn the SAMBA upside-down, allowing the battery to drop out.

SAMBA Changing the Battery (2)
3

Take a new battery and remove the foil. Place the battery in the audio processor’s battery compartment. Slide the battery compartment into the audio processor.

SAMBA Changing the Battery (3)

Battery Options

Use only type 675 batteries to power your SAMBA. We recommend using zinc-air batteries that are designed especially for hearing implant systems. When you use SAMBA with the WaterWear accessory, however, you must substitute zinc-air batteries with one of the other types.

Maximum
battery life
Requires
oxygen supply
Compatible
with WaterWear
60 hours    
6 hours    
15 hours    
 
Book-Icon

Refer to your user manual for more information.