This guide is designed to help you use, and care for, your FineTuner Remote Control.
FineTuner Keypad Lock
The FineTuner features an optional automatic keypad lock to avoid unintentional operation. This locks the keypad if no key is pressed for more than 10 seconds.
To activate the keypad lock feature of your FineTuner, hold down the double arrow key for more than 5 seconds to enter the program mode. The red and both amber indicator lights on your FineTuner will start blinking alternately indicating that you have successfully entered the FineTuner’s program mode. Then hold down the right arrow key to activate the automatic keypad lock. The FineTuner will confirm successful activation of the automatic keypad lock by a short blinking signal of the two amber indicator lights.
To use the FineTuner while the keypad lock is active, press any desired key twice. The first press temporarily unlocks the keypad, and the second press executes the command. After 10 seconds without pressing another key, the keypad is locked again.
To deactivate the automatic keypad lock, press the double arrow key twice to unlock the keypad, then hold it down for more than 5 seconds to enter the program mode. Press the left arrow key to deactivate the keypad lock. The FineTuner will confirm successful deactivation of the automatic keypad lock with a short blinking signal of the two amber indicator lights.
*The content on this website is for general informational purposes only and should not be taken as medical advice. Please contact your doctor or hearing specialist to learn what type of hearing solution is suitable for your specific needs. Not all products,
features, or indications shown are available in all areas.